Form 1004D for New Construction & Rehab Loans: Final Completion Checklists
Complete compliance and contractor execution playbook for punch-list completion for appliances, grading, steps & hardware under New Construction 1004D. Typical cost: $350–$1,400, turnaround: 1–2d, with full Form 1004D verification steps.
Why Punch-List Completion for Appliances, Grading, Steps & Hardware Triggers "Subject To" Appraisal Conditions
When a residential mortgage appraisal is completed under New Construction 1004D, any deficiency involving punch-list completion for appliances, grading, steps & hardware shifts the report from "As-Is" to "Subject To" repair or inspection. Unlike general home inspection negotiation items, an appraisal condition tied to punch-list completion for appliances, grading, steps & hardware is a hard underwriting gate that must be resolved and verified—typically via Fannie Mae Form 1004D / Freddie Mac Form 442—before the lender issues Clear to Close (CTC).
Regulatory Standard & Underwriting Benchmark (New Construction 1004D)
- Governing Guideline: New Construction 1004D requires the component to be safe, structurally sound, weather-tight, and fully operational at the time of loan closing.
- Typical Repair Cost: $350–$1,400 depending on material access and regional labor rates.
- Expected Field Turnaround: 1–2d from dispatch to completion photos.
Step-by-Step Field Remediation Playbook
1. Pre-Work Scope Matching & Geotagged Before Photos
Before altering the area, match the exact sentence on the appraisal addendum to the physical condition on site. Capture a wide-angle context shot and a close-up Before Photo from the same vantage point the appraiser used.
2. Trade Execution Specification
Finish final builder punch-list items (missing outlet covers, deck stairs, final grading) before the final 1004D.
Ensure all replacement materials are permanent, code-compliant, primed, painted, or sealed to match adjacent finishes, and that all construction debris or paint flakes are completely removed from the site.
3. Underwriting Evidence & Form 1004D Verification
| Verification Layer | Appraiser / Underwriter Requirement | Common Kickback Cause | | :--- | :--- | :--- | | Matched After Photos | Wide context + close-up showing completed finish | Cropped photo with no room/elevation context | | Itemized Invoice | Line item explicitly naming "Punch-List Completion for Appliances, Grading, Steps & Hardware" | Vague invoice reading "General handyman labor" | | Workmanlike Finish | Painted, caulked, flush, and permanent | Unpainted wood, raw drywall mud, or temporary patch |
Fast-Track Coordination with AppraisalFix
AppraisalFix connects loan officers, processors, homeowners, and real estate agents with vetted local handymen and licensed trades who specialize in mortgage appraisal repairs and Form 1004D clearance.
Frequently Asked Questions
How fast can punch-list completion for appliances, grading, steps & hardware be cleared for a 1004D re-inspection?
Most punch-list completion for appliances, grading, steps & hardware callouts are completed within 1–2d of quote approval, allowing the loan processor to order the Form 1004D re-inspection immediately with pre-audited completion photos.
Related Guides
Fannie Mae Appraisal Rules on Accessory Dwelling Units (ADUs) & Illegal Kitchens
Complete compliance and contractor execution playbook for second kitchen stove removal & gas/240v cap-off under Fannie Mae B2-3-04 ADU. Typical cost: $175–$425, turnaround: 24h, with full Form 1004D verification steps.
HUD 4000.1 Attic Head-and-Shoulders Inspection Requirements & Scuttle Access Fixes
Complete compliance and contractor execution playbook for attic scuttle opening & access clearance under HUD 4000.1 Attic Observation. Typical cost: $150–$550, turnaround: 24h, with full Form 1004D verification steps.
Asbestos Pipe Wrap & Vermiculite Insulation on Appraisals: Encapsulation vs. Abatement
Complete compliance and contractor execution playbook for protective fiberglass re-jacketing & mastic encapsulation on intact pipe under Fannie/HUD Friable Asbestos Rules. Typical cost: $350–$950, turnaround: 24–48h, with full Form 1004D verification steps.
have appraisal repairs holding up a closing?
Get a qualified handyman on-site in 24–48 hours and a re-certified 1004D in days, not weeks.